Lights have become a part of our life. Red and green light plays a major role in our everyday routine. From flashing green traffic signals to blinking green LEDs on Netgear routers, every light has its own importance and meaning. And like this red light on the Netgear router also come up with its meaning and message.
What does the issue mean? Which steps do you have to follow to fix it? First of all, don’t worry, you have now arrived at the right place. In this article, you will find accurate information about what the red light means on a Netgear router and 5 ways to fix the issue.
What is the Netgear Router Red Light Issue?
If your router’s LED light is flashing red , it means your device is facing some problem. It can be caused by several factors, like outdated Netgear router firmware update, an issue with the Ethernet cable or power supply, etc. With no
further discussion, let’s come to the ways through which you can easily fix the red light issue on the Netgear router.
Steps to Fix Netgear Router Red light Issue
1. Power Cycle your Router
Before trying one’s hand at advanced troubleshooting tips, reboot your router. Check whether the problem resolves or not. You just have to unplug the router and after waiting for a few minutes, plug it back. This will remove technical issues along with clearance of memory cache. We hope your Netgear router stopped flashing red.
2. Check the Power Supply
The power supply can also be the main cause behind the red light issue, so check whether the router receives an efficient power supply or not. It can also happen if the power socket you are using is damaged, or can’t provide an efficient power supply. So, we recommend you either choose another power socket or repair the existing one to plug in the Netgear router.
3. Verify the Ethernet Connection
Check the Ethernet connection between the router and modem. Ensure that the connection should be finger-tight. Use well maintained Ethernet cable for the connection. Make sure the Ethernet cable should not be damaged or cheer out from any sides.
4. Perform Netgear Router Firmware Update
Another effective way that you can try to fix the red light issue is to check the Netgear router firmware update and install it. And along with fixing this issue, it will also improve overall performance and security of your device. You can easily do it by performing Netgear router login. Don’t know how to update the Netgear router firmware? Don’t worry we have got your back. Keep reading and follow the exact steps mentioned below:
1. Launch an web browser on your device. Keep an eye on whether you are using an updated version of the web browser.
2. Make sure you delete cache, cookies, and junk files from your browser.
3. Enter www.routerlogin.net in your address bar.
4. Keep in mind, mistyped web address might take you to a third-party website.
5. The Netgear router login page will display on your screen.
6. Click Log In button after filling in the required credentials in their respective fields.
7. Head towards to Settings page and navigate the Administration option.
8. Click on the Firmware Update button and follow the on-screen instructions.
So, in this way you can update your Netgear router firmware. After updating the firmware, check whether the issue is resolved or not.
5. Reduce Distance between Devices
The router and modem should not be placed too far as it can also cause the Netgear router red light issue. However, placing them too near can also cause problems as the chances of clashes of the signal are increased. Thus, make sure
that the distance between your networking devices is safe.
A quick tip: If you have tried all the aforesaid solutions to resolve the problem and even now you are facing the issue of red light, then we suggest you contact your internet service provider. Maybe the issue was not with the router but with the internet.
After a few seconds, even the red traffic signal turns green. So like this, your router’s red lights will also turn to solid green after following the aforementioned tips. We hope this article will guide you to get rid of the Netgear router red light issue.
Tell us by leaving a comment, by which troubleshooting tip you had solved the issue of the red light with your Netgear router.
