A Universal Guide to Do Rockspace Extender Firmware Update

re.rockspace.local

Do you want your Rock space wireless extender to function well 24×7? Are you nodding your head in yes? Well then, you have paved your way to the right post. Here, we have mentioned the guidelines following which performing Rock space extender firmware update via re.rockspace.local will become a walk in the park for you. So, stick to reading.

How to Do Rockspace Extender Firmware Update?

1. Turn On the Extender

Initiate the Rockspace firmware update process by plugging your range extender into a power outlet. Make sure that the power or wall outlet is not damaged from anywhere. Once assured, press the power button on the extender.

2. Connect the Extender to the Router

Get your hands on an Ethernet cable. Connect one end of the cable to the host router and another to the Rock space range extender. The Ethernet cable currently in use should not have any deep cuts. Also, it should not be worn out. Otherwise, you will not be able to update the firmware of your device successfully.

3. Open an Internet Browser

Switch on your system [computer or laptop]. Which is the web browser that you usually use? Is it Google Chrome or Mozilla Firefox? Well, whichever it is, open it. See to it that it is not functioning on an outdated version. Also, its history and cache should be cleared.

4. Visit re.rockspace.local

Now, you are required to access re.rockspace.local. And for that, you need to locate the address bar of your web browser. Once you find it, input re.rockspace.local into it and press Enter. Soon, you will find yourself on the official login window of your range extender.

5. Perform Rockspace Login

Once you have accessed the login portal, you need to put the default admin login details of your extender to use. After that, click on the Log In button. The Rockspace WiFi extender setup wizard will appear in front of you.

6. Update Extender Firmware

Locate the Settings menu on the wizard. Once you find it, click on it and select the Administration option. Thereafter, click the Firmware Update button and wait for your Rock space wireless range extender to reboot. Once your device is done restarting, the firmware update process will come to an end.

Although performing Rock space extender firmware update is not rocket science, but, various users experience issues during the process. Are you one of them? If yes, then you should not waste any more time in going through the following hacks.

Rockspace Extender Firmware Update Failed?

1. Power Supply

Check if your Rock space range extender is getting an adequate power supply from its socket. In case, it is not, then you need to plug your extender into a different one.

2. Ethernet Connection

The Ethernet cable that has been used to connect both your networking devices should be properly connected to their Ethernet ports.

3. Web Address

Check the web address that you have entered. If you find out that there are typing errors in it, then it is recommended that you type the web address again.

4. WiFi Interference

In case smart home appliances and reflexive surfaces are kept near your Rock space range extender, it is recommended that you change its location.

5. Distance

If you have not placed your extender near the host router, then it is high time that you do now. But, do not place them too close to each other. Or else, their signals will clash. After following these troubleshooting hacks, try to update the firmware of your Rock space wireless range extender.

The Bottom Line
Performing Rock space extender firmware update is important if you want to enhance the performance of your device and fix bugs and errors. We expect that with the help of the steps given above, you will be able to carry on this process in a hassle-free manner.

Leave a Reply

Your email address will not be published. Required fields are marked *